You have no items in your shopping cart.
Product Description
Thunder Tiger (4839-K21) ~ RAPTOR Sport Kit W / PRO-39H Engine
Since the introduction of the original Raptor 30 in 1998, many have been sold around the world. It has helped beginners master the art
of RC helicopter flying.
Specification
Full Length of fuselage: 1150mm (45.27")
Full width of fuselage: 140mm (5.51")
Total height: 400mm (15.75")
Main rotor dia: 1245mm (49")
Tail rotor dia: 260mm (10.25")
Gear ratio: 1:9.56:4.57
Full equipped weight: 3000g (6.6 lbs)
This model was designed and engineered by the World-renowned Mr.Shigetada Taya. It combines elements of his previously successful designs with today's advanced technologies. this is truly a versatile model helicopter for everyone.
The Thunder Tiger team of engineers and test pilots have collected feedback from around the world and have made the Raptor 30 an even better helicopter. New molds and tooling for parts and many other areas have subtle changes to increase strength and durability. All production parts use the most modern technology available to meet the standards as set forth by ISO-9001. In the last few years we have spend time and resource to develop a new thunder Tiger PRO-39H(R) engine for the Raptor 30 v2 and other 30 size helicopters. Available in ARF or kit form, the new Raptor 30 v2 and the PRO-39H(R) engine will provide you with many hours of enjoyment available.
Features
Heavy duty collective pitch arm
Enlarged engine starting shaft from 5mm to 6mm
Aerodynamic canopy for faster flights
Metal alloy spring steel clutch with larger diameter
Elevator control arm enhanced to eliminate flex
Extended fan shroud increases cooling effectiveness, and strengthens
The forward sideframe stiffness at the same time
Main rotor blade spindle enlarged to 6mm provides solid hovering, responsive
3-D performance and consistent blade tracking
Main rotor blade radial and thrust bearings enlarged from 5mm to 6mm for more precise blade pitch control
Thicken the steel ball mounting area on the flybar paddle control arms by 0.5m eliminates any flexing under extreme 3-D flying
Tail rotor grips are the same as the 60 providing more solid control, and larger tail rotor diameter
Vertical tail fin lengthened by 10mm to protect tail rotor blades during rough landings, and re-enforced with ribs
Swashplate re-designed for longevity and minimal freeplay
Fuel tank resigned for Raptor .30 v2 with 340cc capacity
Tank reduces aircraft CG shift and carburetor sensitivity
Rugged aluminum tail boom supports with plastic ends eliminate fatigue and cracking
Larger volume 30-size muffler for increased power and low noise
Re-designed and strengthened sideframes increase crash survivability, and reduce engine vibrations
New frames use Raptor 60 style heavy duty double ball bearing for engine starting shaft. Frames also include built-in molded clips for gyro wire
Start your radio control helicopter experience today with the Venerable Raptor 30 V2. This easy to learn Heli comes brand new in the box. With just a few minutes your engine and your R/C device you can have hours of enjoyment and as you learn this allows you to upgrade. Come Fly The Sky with the RAPTOR 30 V2 Sport kit with PRO-39H Engine!!!
~~~ If you have any questions??? Please feel free to contact me at PAUL@ChopperHobbies.com ~ Thanks for Flying with Chopper Hobbies!!! PAUL>
Since the introduction of the original Raptor 30 in 1998, many have been sold around the world. It has helped beginners master the art
of RC helicopter flying.
Specification
Full Length of fuselage: 1150mm (45.27")
Full width of fuselage: 140mm (5.51")
Total height: 400mm (15.75")
Main rotor dia: 1245mm (49")
Tail rotor dia: 260mm (10.25")
Gear ratio: 1:9.56:4.57
Full equipped weight: 3000g (6.6 lbs)
This model was designed and engineered by the World-renowned Mr.Shigetada Taya. It combines elements of his previously successful designs with today's advanced technologies. this is truly a versatile model helicopter for everyone.
The Thunder Tiger team of engineers and test pilots have collected feedback from around the world and have made the Raptor 30 an even better helicopter. New molds and tooling for parts and many other areas have subtle changes to increase strength and durability. All production parts use the most modern technology available to meet the standards as set forth by ISO-9001. In the last few years we have spend time and resource to develop a new thunder Tiger PRO-39H(R) engine for the Raptor 30 v2 and other 30 size helicopters. Available in ARF or kit form, the new Raptor 30 v2 and the PRO-39H(R) engine will provide you with many hours of enjoyment available.
Features
Heavy duty collective pitch arm
Enlarged engine starting shaft from 5mm to 6mm
Aerodynamic canopy for faster flights
Metal alloy spring steel clutch with larger diameter
Elevator control arm enhanced to eliminate flex
Extended fan shroud increases cooling effectiveness, and strengthens
The forward sideframe stiffness at the same time
Main rotor blade spindle enlarged to 6mm provides solid hovering, responsive
3-D performance and consistent blade tracking
Main rotor blade radial and thrust bearings enlarged from 5mm to 6mm for more precise blade pitch control
Thicken the steel ball mounting area on the flybar paddle control arms by 0.5m eliminates any flexing under extreme 3-D flying
Tail rotor grips are the same as the 60 providing more solid control, and larger tail rotor diameter
Vertical tail fin lengthened by 10mm to protect tail rotor blades during rough landings, and re-enforced with ribs
Swashplate re-designed for longevity and minimal freeplay
Fuel tank resigned for Raptor .30 v2 with 340cc capacity
Tank reduces aircraft CG shift and carburetor sensitivity
Rugged aluminum tail boom supports with plastic ends eliminate fatigue and cracking
Larger volume 30-size muffler for increased power and low noise
Re-designed and strengthened sideframes increase crash survivability, and reduce engine vibrations
New frames use Raptor 60 style heavy duty double ball bearing for engine starting shaft. Frames also include built-in molded clips for gyro wire
Start your radio control helicopter experience today with the Venerable Raptor 30 V2. This easy to learn Heli comes brand new in the box. With just a few minutes your engine and your R/C device you can have hours of enjoyment and as you learn this allows you to upgrade. Come Fly The Sky with the RAPTOR 30 V2 Sport kit with PRO-39H Engine!!!
~~~ If you have any questions??? Please feel free to contact me at PAUL@ChopperHobbies.com ~ Thanks for Flying with Chopper Hobbies!!! PAUL>
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
