You have no items in your shopping cart.
Product Description
90 3D Kit (4892-K10) + OS 91HZ F3C Ring Engine + High Performance Muffler
Continue your radio control helicopter experience today with the Raptor 90 3D.
The new Raptor 90 3D was created for the 3D aficionados. Taking the proven Raptor 90 SE as the foundation, using only the essential parts for extreme 3D flying.
Specification
Full Length of fuselage: 1410mm (55.50")
Full width of fuselage: 190mm (7.50")
Total height: 476mm (18.75")
Main rotor dia: 1605mm (63.25")
Tail rotor dia: 260mm (10.25")
Gear ratio: 8.27:1:4.65
Full equipped weight: 4800g (10.5 lbs)
All the features that made "Raptor" Added the must-have options for 3D, at lower cost. The CNC machined aluminum rotor hub and 30 grams weight paddles with large control surface area and a thick airfoil makes a lightening fast cyclic responce and rock solid hover. With two different Bell-Hiller mixing ratios offer the pilots a choice of agile, very agile and extremely agile control responses. The Raptor 90 3D is what you need for all-out 3D flying at a minimal invesment.
Features:
Machined metal main rotor hub
New nonlinear stiffness flapping damper
Machined metal bearing blocks for main rotor shaft
Aluminum seesaw that permits three different Bell-Hiller mixing ratios
Bell-Hiller mixing arms with holes for different control sensitivities
Light weight 30 grams Hiller control paddles for 3D flying
Push/Pull system for collective, roll cyclic and foward/after cyclic control
Machined metal foward/after cyclic control lever
Carbon graphite 3D vertical fin
Light weight tail boom bracket for attaching tail boom support
8.27 to 1 gear ratio for 3D flying ( 91T main gear and 11T pinion )
The Raptor 90 3D combines the quintessential features at a minimum of price. This 3D Chopper will delight you with crisp maneuvers and tight response. This fun to fly Heli comes brand new in the box. With just a few minutes and your R/C device you can have hours of enjoyment. Come Fly The Sky with the RAPTOR 90 3D kit with OS 91HZ F3C Ring Engine and Muffler!!!
~~~ If you have any questions??? Please feel free to contact me at PAUL@ChopperHobbies.com ~ Thanks for Flying with Chopper Hobbies!!! PAUL>
Continue your radio control helicopter experience today with the Raptor 90 3D.
The new Raptor 90 3D was created for the 3D aficionados. Taking the proven Raptor 90 SE as the foundation, using only the essential parts for extreme 3D flying.
Specification
Full Length of fuselage: 1410mm (55.50")
Full width of fuselage: 190mm (7.50")
Total height: 476mm (18.75")
Main rotor dia: 1605mm (63.25")
Tail rotor dia: 260mm (10.25")
Gear ratio: 8.27:1:4.65
Full equipped weight: 4800g (10.5 lbs)
All the features that made "Raptor" Added the must-have options for 3D, at lower cost. The CNC machined aluminum rotor hub and 30 grams weight paddles with large control surface area and a thick airfoil makes a lightening fast cyclic responce and rock solid hover. With two different Bell-Hiller mixing ratios offer the pilots a choice of agile, very agile and extremely agile control responses. The Raptor 90 3D is what you need for all-out 3D flying at a minimal invesment.
Features:
Machined metal main rotor hub
New nonlinear stiffness flapping damper
Machined metal bearing blocks for main rotor shaft
Aluminum seesaw that permits three different Bell-Hiller mixing ratios
Bell-Hiller mixing arms with holes for different control sensitivities
Light weight 30 grams Hiller control paddles for 3D flying
Push/Pull system for collective, roll cyclic and foward/after cyclic control
Machined metal foward/after cyclic control lever
Carbon graphite 3D vertical fin
Light weight tail boom bracket for attaching tail boom support
8.27 to 1 gear ratio for 3D flying ( 91T main gear and 11T pinion )
The Raptor 90 3D combines the quintessential features at a minimum of price. This 3D Chopper will delight you with crisp maneuvers and tight response. This fun to fly Heli comes brand new in the box. With just a few minutes and your R/C device you can have hours of enjoyment. Come Fly The Sky with the RAPTOR 90 3D kit with OS 91HZ F3C Ring Engine and Muffler!!!
~~~ If you have any questions??? Please feel free to contact me at PAUL@ChopperHobbies.com ~ Thanks for Flying with Chopper Hobbies!!! PAUL>
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
